P3 Gauges Analogue Gauge for BMW 6 Series F12/F13/F06 (2011-2018)

P3 analogue Gauge 

• analogue boost¬†(yellow/purple/black¬†- dedicated plug for analogue boost sensor)¬†*boost tap not included
• analogue input 1¬†(brown wire¬†- can read any 0-5 volt linear output sensor)
• analogue input 2¬†(blue wire¬†- can read any 0-5 volt linear output sensor)
• Battery voltage¬†(red wire¬†/¬†black wire¬†- read through power and ground wires)
• optional auto-dim feature¬†(green wire¬†- connect to any circuit that gets power only when the headlamps are on and enable feature in the configuration menu for the display to auto-dim when the headlamps are on)

This gauge IS NOT plug and play like the OBD2 gauges. Boost/vacuum hose to the engine is required and wiring needs to be completed for power, ground, and optional analogue inputs.

Kit Contents

• Integrated display
• analogue Box control unit
• Main harness
• Hard-wire harness
• analogue boost sensor¬†*boost tap not included
• Approximately 5' of 5/32" O.D. boost tubing with 5/32" I.D. hose at each end
• 3 zip ties
• 2 scotchlok wire taps

Optional Add-Ons

• OBD2 power/ground tap harness¬†allows you to connect to power and ground through your OBD2 port without any wire splicing (does not add OBD2 functionality)
• P3 ESVA (ethanol sensor voltage adaptor)¬†allows your gauge to read ethanol content and fuel temp directly from any Continental/GM Ethanol sensor¬†*Ethanol sensor not included
• LC-2 Wideband o2 Sensor Kit¬†allows your gauge to read your vehicle's Air/Fuel Ratio. Includes everything you need to add a wideband sensor to your exhaust.
• Any Other 0-5 Volt¬†Linear Output¬†Sensor Can Be Read¬†oil pressure, oil temp, coolant temp, air ride pressure, egt, etc...