Xtreme Performance Clutch Kit Heavy Duty Sprung Ceramic 410Nm 650kg (55% inc.) - Honda Civic Gen. IV (87-91)

Recommended for: Motorsport Applications

These kits are available with sprung ceramic friction discs and are designed for motorsport applications where higher heat and torque capacity is required. These can also be used in some road applications.

• Torque capacity 410Nm
• Clamp load 650kg 55% Increased over standard
• Sprung Ceramic Friction Disc
• Heavy Duty Pressure Plate
• Kit contains everything you need for a successful installation + accessories

The sprung ceramic range of kits have been developed for motorsport applications where a higher heat and torque capacity is required. These discs utilise a sprung hub that helps to reduce shock loading and are commonly used in track cars that retain the factory transmission.

At Xtreme Clutch, we strive to offer a variety of clutch options for each vehicle to ensure a clutch solution is available for every vehicle application. Whether you are modifying a road vehicle or building a race car from scratch, we have the clutch solution for you. Our upgrades are divided into different stages depending on the friction disc material and the number of friction discs.

Xtreme Performance upgrade kits are available with everything you need for a successful installation + accessories you may want to upgrade or replace while the gearbox is out of the vehicle.

Applications

- Honda/Civic/Gen. V | 1.6 si 16V (EG6)/1991.10-1993.10/D16A8 1590 Petrol 90 kW 122 BHP (1991.10 - 1993.10) , \n - Honda/Civic/Gen. V | 1.6 si 16V (EH8)/1991.10-1993.10/D16A8 1590 Petrol 90 kW 122 BHP (1991.10 - 1993.10) , \n - Honda/CRX/Gen. II | 1.6 i 16V (ED9)/1987.10-1989.12/D16A8, D16A9 1590 Petrol 96 kW 131 BHP (1987.10 - 1989.12) , \n - Honda/Civic/Gen. IV | 1.6 i 16V (ED4)/1987.10-1991.09/D16Z2 1590 Petrol 81 kW 110 BHP (1987.10 - 1991.09) ,

Additional Info

Clutch Disc Diameter (mm): 212\nClutch Disc Spline Count: 20\nClutch Disc Spline Diameter (mm): 22\nTorque (Nm): 410\nFlywheel Step: -1.5mm/.060""\nDesign: Single Plate\nStage: Stage 2\nTech Bulletins: \nClamp Load: 650Kg (55% inc.)\nRecommended for: Track - Stage 2\nRing Gear Tooth count: \nAdditional infotmation:

Single Plate

Vehicle group: Honda Civic Gen. IV

Additional info: Parameter 1: 410 | Parameter 2: Track Use | Parameter 3: Not included

Fitment details:

Make / Model / Variant / Year	Engine	Description	Note	Parameter 1	Parameter 2	Parameter 3
Honda Civic Gen. IV | 1.6 i 16V (ED7) (1987.10-1991.09)	D16A6 1590 Petrol 80 kW 109 BHP (1987.10 - 1991.09)			410	Track Use	Not included
Honda Civic Gen. IV | 1.6 si 16V (EG2, EG6) (1991.10-1993.10)	D16A8 1590 Petrol 90 kW 122 BHP (1991.10 - 1993.10)			410	Track Use	Not included
Honda Civic Gen. IV | 1.5 i 16V (ED3) (1987.10-1991.09)	D15B2, D15B3 1493 Petrol 66 kW 90 BHP (1987.10 - 1991.09)	Suits vehicles manufactured from 01/1990.		410	Track Use	Not included
Honda Civic Gen. IV | 1.5 16V (ED3, SH4) (1987.09-1991.09)	D15B2, D15B3 1493 Petrol 69 kW 94 BHP (1987.09 - 1991.09)	Suits vehicles manufactured from 01/1990.		410	Track Use	Not included
Honda Civic Gen. IV | 1.6 i 16V (ED4) (1987.10-1991.09)	D16Z2 1590 Petrol 81 kW 110 BHP (1987.10 - 1991.09)			410	Track Use	Not included

Xtreme products are special order and may be on backorder. If you require this urgently please get in touch before ordering to check stock. You will be contacted within 24 hours of your order if it is on backorder